Switch to accessible version



add to cart
  add to list

Mono amplifier
1500x1 @ 4O, 2500x1 @ 2O , 2500x1 @ 1O

Cta-2006 Compliant

Number of Channels


Total Power
(Sum of Rated Power)

2500 Watts RMS

Rated Power
(RMS Continuous Power)

1500 Watts x 1 @ 4-Ohm
2500 Watts x 1 @ 2-Ohm
2500 Watts x 1 @ 1-Ohm

Two amplifiers in bdSYNC:
5000 Watts x 1 @ 2-Ohm

Dynamic Power

1823 Watts x 1 @ 4-Ohm
2940 Watts x 1 @ 2-Ohm
2980 Watts x 1 @ 1-Ohm


(two amps can be "strapped" together using bd-Sync2 cable to create one monster amplifier)

Frequency Response

20Hz to 250Hz +/-0.5dB

Input Sensitivity

150 mV to 4 V

Circuit Topology Class

Class BD

Efficiency (average)

81.9% @ 4-Ohm
77.7% @ 2-Ohm
64.5% @ 1-Ohm

Total Harmonic Distortion (THD+Noise)

4-Ohm: <1.0%
2-Ohm: <1.0%
1-Ohm: <1.0%

Signal Input

1 RCA pair

Signal Output

1 RCA pair

Tone Controls

Bass: 0dB to +18dB @ 45Hz

Crossover Controls

Low-Pass (LP): 35Hz-250Hz @ 24dB/octave Butterworth
Infrasonic: 12dB/octave Butterworth, -3dB @ 28Hz

Remote Controls

Optional Remote PEQ
(overrides built-in Punch Bass)

Visual Indicators

Power (Blue LED)
Thermal (Red LED)
Protect (Yellow LED)
Output -00dB to +2dB @ 11 steps (Blue LEDs)
Battery 9VDC to 16VDC @ 11 steps (Blue LEDs)

Power Wire Gauge

1/0 AWG

Power Input Connector


Speaker Wire Gauge

8 AWG to 16 AWG

Speaker Output Connector





Operating Voltage

9 - 16 VDC

Recommended Fuse
(not included)

300 A

Average Current Draw (13.8V Music)

175 A

Max. Current Draw (13.8V Sinewave)

350 A

Suggested Alternator

200 A

Included In The Box

Dimensions (H x W x D)

2.14 x 8.14 x 21.875 (in)
5.44 x 20.68 x 55.66 (cm)

Shipping Weight

21.7 Lbs. (9.84 Kg.)

The T2500-1bdCP is based on the legendary T2500-1bd amplifier design with a proprietary "Constant Power" configuration that delivers up to 25% more power (Watts) across all impedance loads. The result is a listening experience cleaner, louder and more impressive than ever before. This T2500-1bdCP amplifier pumps out 2,500 watts, easily driving any array of woofers wired to a 1-ohm load. Use two amps in Power-Sync mode for a whopping 5,000 watt power horse!


  • 24dB/octave crossover
  • 1/0 AWG power/ground connectors
  • MOSFET power supply
  • Audiophile grade speaker connections
  • Infrasonic filter
  • MOSFET output stage
  • RCA pass-thru outputs
  • PowerSync - allows 2 amplifiers to be "strapped" together
  • MasterSync - allows 1 amplifier to control an array of amplifiers
  • 0°/180° Phase Switch
  • Blue L.E.D. Simulated VU Signal/Power Meters

Please choose a department and category to see accessories compatible with this product.